Select Page

Why electricity is being transmitted in multiple of 11??

13

APRIL, 2018

### Why is electric power transmission lines 11KV OR 33KV, 66KV not in 10KV, 20KV, or 30KV?

First of all, It is not true that all the transmissions and distribution voltages are multiple of 11. In most case, they are multiple of 11 such as 11kV, 22kV, 33kV, 66kV & 132kV. But 400kV, 765kV and 800kV etc are not multiple of 11 in case of electric power system in power lines from the generation station to the receiving point.

Many people cite form factor a reason for so. Form Factor is defined as “RMS Value to Average value of a given AC voltage” and it is different for different waveforms.

The commonly used AC waveform we know is Sine Wave. A sine wave AC waveform has form factor of 1.11 (Approx.). So, the reason given is that the transmitted voltage of 10kV, 20kV, 60kV etc. is multiplied to this form factor to obtain such results which is described in the question like..

• 10kV → 10 x 1.11 = 11.1 kV
• 20kV → 20 x 1.11 = 22.2 kV
• 60kV → 60 x 1.11 = 66.6 kV
• 120kV →1.11 = 133.2kV

If we considered the value of first three cases approximately correct but there is a big difference in forth case of about 1.2kV.

What about 800kV, 765kV, 400kV Voltage Levels (Which is not multiple of 11)?

Modern extra high voltages (EHV) and ultra high voltages (UHV) lines operate at much higher voltage like 400 – 800kV. Higher voltage at same kVA reduces flow of current and thus reduces I²R loss. With decreased value of I²R losses, we don’t need to care much about line drop as that will automatically decrease. Increase in current causes increase in current density defined as (current/unit cross section area of the cable) and thus causes increase in electric field intensity in the surrounding (J=σE where J is the current density and E is electric field intensity). This E causes corona discharge and thus corona loss.

These aren’t the problems when it comes to extra high voltage transmission and thus voltages like 765kV or similar mid-range voltages are possible to transmit. The only main concern with EHV transmission is distance, insulation of the line and height of tower. Voltage drop becomes insignificant. Lower value of current reduces corona as well.

Want new articles before they get published?

BASICS

What maximum voltage human body can withstand ?

BASICS

What is proximity effect in power system?

BASICS

What is corona effect in power system?